Türkiye
İmalatçı/ Üretici
TECHNIPARTS LTD
Türkiye
O-ring FKM FPM VITON® FPM/FKM Viton® o-rings are often used in aerospace, automotive and other mechanical applications requiring maximum resistance to high temperatures and all kinds of chemicals, liquids and other media.This fluoroelastomer is used in many applications where O-rings must be resistant to high temperatures and chemicals. FKM / FPM / Viton ® is a fluorocarbon elastomer often used in the production of seals, and for o-rings it is the best solution for applications requiring maximum resistance to temperatures and many fluids, such as for use in the aviation, automotive, chemical industries. FKM / FPM / Viton ® has a high temperature range of -26°C to +205°/230°C (-15°F to +400°/440°F). For short periods, the temperature can rise even higher. It is known for its chemical compatibility, temperature range, low compression set and very good aging characteristics.
Fiyat teklifi isteyinTECHNIPARTS LTD
Türkiye
O-Ring NBR BUNA NITRILE NBR Buna Nitrile O-Rings: High Performance and Durable Rubber Solutions Techniparts Rubber is your manufacturer and trusted source for EPDM o-rings of all sizes. Nitrile butadiene rubber, especially NBR (Buna-N), is a highly desirable synthetic elastomer for o-rings and other seals. NBR Nitrile Rubber (Buna-N) Properties and Advantages: NBR stands out as an elastomer that is a combination of butadiene and acrylonitrile monomers. This material makes it highly resistant to water and chemicals. The superior physical properties of NBR include high tensile strength, low compression setting and excellent abrasion resistance. These properties make NBR an ideal solution for coating water and petroleum-based fuels. Applications of NBR O-rings: NBR o-rings are called nitrile o-rings or Buna-N o-rings and are widely used in automotive, aerospace, industrial tools and machinery.
Fiyat teklifi isteyinTECHNIPARTS LTD
Türkiye
O-ring EPDM An o-ring is a type of seal commonly used in static or dynamic applications where liquids or gases must be prevented from escaping. EPDM (ethylene propylene diene monomer) is a type of synthetic rubber often used to make O-rings due to its excellent chemical and heat resistance. EPDM o-rings are commonly used in a variety of applications including automotive, plumbing and aerospace industry. They are resistant to a wide range of chemicals including acids, alkalis and alcohols and can withstand temperatures from -40°C to 150°C. In addition, EPDM o-rings are known for their excellent electrical insulating properties and low compression set, which means they retain their original shape even after compression. In general, EPDM o-rings are a popular choice for many applications due to their durability, versatility, and environmental resistance. EPDM o-rings are short for ethylene, propylene, diene and monomer and are a group of synthetic rubbers or elastomers.
Fiyat teklifi isteyinTECHNIPARTS LTD
Türkiye
O-ring VMQ (Silicone) The VMQ MVQ Silcone O-Ring is a seal used to prevent leakage of liquids or gases between two mating surfaces. VMQ, which stands for vinyl methyl silicone, is a type of silicone rubber commonly used to make o-rings. Silicone VMQ MVQ O-rings are known for their excellent resistance to high and low temperatures, ozone, weathering and chemicals. They can withstand temperatures from -55°C to 200°C, making them ideal for use in high temperature applications such as automotive engines, aerospace and industrial equipment. VMQ MVQ silicone o-rings also have good resistance to water, steam and many other liquids, making them suitable for use in a wide variety of applications including the food, pharmaceutical and medical industries. Overall, MVQ VMQ silicone o-rings are a popular choice due to their superior performance, durability and reliability in a wide variety of applications.
Fiyat teklifi isteyinTECHNIPARTS LTD
Türkiye
O-ring ACM ACM O-rings High Temperature and Mineral Oil Resistance Properties of ACM O-rings: ACM (acrylic rubber) o-rings provide excellent resistance to mineral oils at high temperatures. ACM o-rings are generally the most widely used o-rings in the automotive industry. The water compatibility and low temperature flexibility of ACM o-rings are significantly worse than NBR. Shore Hardness Available: 70 Shore 75 Shore 80 Shore Color options: Standard color: Black Supplier Information: TECHNIPARTS Kauçuk - Kauçuk Bursa, Turkey Manufacturer and supplier of EPDM and ACM O-rings of all sizes
Fiyat teklifi isteyinTECHNIPARTS LTD
Türkiye
O-Ring HNBR HNBR (hydrogenated nitrile butadiene rubber) is produced by the complete or partial hydrogenation of double bonds in nitrile butadiene rubber with hydrogen to single bonds. Compared with NBR o-rings, HNBR o-rings have better properties in terms of oil resistance, heat resistance and strength. It is more resistant to ozone and aggressive substances and can be operated from -40°С to +165°С (with peaks up to +190°С). Shore Hardness (Shore A) We can supply HNBR o-rings in different hardness: O-ring 40 Shore, 45 Shore, 50 Shore, 55 Shore, 60 Shore, 65 Shore, 70 Shore, 75 Shore, 80 Shore, 85 Shore , 90 Shore. HNBR o-ring colors (standard): black, green All other colors on request such as; , yellow, white, yellow, blue, purple. With manufacturing facilities in Bursa, we are able to produce O-rings in the shortest possible time and in the highest quality in accordance with ISO 3601/1 standards.
Fiyat teklifi isteyinTECHNIPARTS LTD
Türkiye
O-ring FEP-Encapsulated TECHNIPARTS Kauçuk is your producer and supplier for all EPDM O-rings in any size! FEP Encapsulated PTFE and FEP o-rings are comparable in material properties. The main difference between PTFE and FEP o-ring is mainly the maximum use temperature and color. PTFE is milky white while FEP is transparent. FEP o-ring is a slightly more cost effective polymer compared to PFA o-rings and has very similar properties to PTFE and PFA in terms of chemical resistance, non-stick and dielectric properties. FEP is completely unaffected by UV radiation and has a UV transmittance of over 97%, making FEP o-rings ideal for UV applications. Fluorinated ethylene propylene was discovered by the chemical company Dupont and sold under the brand name Teflon FEP. Other notable brands are Daikin’s Neoflon FEP and 3M’s Dyneon FEP.
Fiyat teklifi isteyinTECHNIPARTS LTD
Türkiye
O-ring CR – Neoprene O-ring CR – Neoprene O-rings made from CR neoprene rubbers are homopolymers of chloroprene (chlorobutadiene) and are functional for the earliest synthetic rubbers used to make seals. CR O-rings are not suitable for aromatic and oxygenated solvents. Various formulations can be used to form neoprene for operating temperatures from -40°C to +110°C. Shore Hardness (Shore A) We can supply CR neoprene o-rings in different hardness: O-ring 40 Shore, 45 Shore, 50 Shore, 55 Shore, 60 Shore, 65 Shore, 70 Shore, 75 Shore, 80 Shore, 85 Shore, 90 Shore. Neoprene O-Ring Colors CR (Standard): Black All other colors on request such as; green, yellow, white, yellow, blue, purple. With manufacturing facilities in Bursa, we are able to produce O-rings in the shortest possible time and in the highest quality in accordance with ISO 3601/1 standards.
Fiyat teklifi isteyinİmalatçı/ Üretici
Cumalikizik Mah. 5. Bahce Sok. No: 28 Yildirim, Bursa Turkey
16000 Bursa - Türkiye
RT KAUCUK POLIÜRETAN VE MAKINA SAN. TIC. LTD. STI (RT GROUP)
Türkiye
Her türlü kauçuk malzemeden vulkanize edilmiş merdane (silindir) imalatı, bunların taşlaması, tamiri ve özel üretim silindir imalatımız bulunmaktadır.
Fiyat teklifi isteyinTek bir talep oluşturun ve doğrulanmış tedarikçilerden birden fazla teklif alın.