ÇH OPTIMUM ENGINEERING CONSULTANCY AND MACHINERY TRADE LLC

In pressurized vertical pipeline systems, samplers are used to extract representative samples from the center of the pipeline. CH-PPS TiP - DN100/4" - DN700/28" Max Pressure - 1.0 MPa/ 10 Bar / 145 PSI Connection FIange Specifications - EN 1092-1 PN 10 / ASME B16.5 Class 150 (DNl00-600) ASME B16.47 Class 150 (ON 700) Sampling Probe Body - S235JR Inner Surface Structure - Rubber coating 5-10 mm, flange surfaces may be 3 mm upon request. Sampling Probe Nozzle - Stainless steel (AISI 316) Body Paint - Epoxy paint 150 μm, RAL code available upon request. Operating Temperature - 0 +50°C Storage Temperature - -20 +50°C

Gravity Flow Pipeline Sampling Devices enable continuous or semi-continuous slurry sampling in unpressurized lines and are used manually or automatically indoors or outdoors in the mining industry. CH-SG TIP - DN100/ 4" - DN600/ 24" Flow rate - Between 25 ond 1000 m3/hour Connection Flange Specifications - EN 1092-1 PN 10 / ASME B16.5 Class 150 (DN100-600) Sampling probe body - S235JR Inner surface structure - Rubber coating 5-10 mm, flange surfaces can be 3 mm upon request Sampling(cutter) - Stainless steel (AISI 316) / rubber coated cutter

This multi-sample collector is suitable for use in confined spaces and can be safely used in processes with high sampling frequency. Product Features: Suitable for high-flow systems, can be adapted to large diameter lines (DN100-DN1000 or more), has a mud-resistant inner surface, adjustable timer, and the cutting gap can be determined based on simulation results. Advantages: High representativeness with frequent sampling, compact and robust construction, easy installation and access, provision of custom designs, and proven performance. Primary and Secondary Samplers: The primary section is made of carbon steel and coated with rubber or ceramic. lt controls the cutting movement with dual proximity sensors. The secondary section has 2 or 4 radial cutters with pre-defined widths and safely provides the division of the primary sample. Washing can be automatically performed with a special nozzle system.

Reservoir samplers are fully enclosed 360° rotating sampling devices. Depending on application, the sampling device may include a single cutte, or multiple cutters. The cutter or cutters rotate at a constant and balanced speed in the falling material or slurry flow, collecting samples from the materials passing through the feed inlet on the machine. As the material passing through the cutter enters a separate sampling container, the material/slurry that does not enter the cutter flows directly downwards and continues within the main line. These sampling devices can be manufactured from carbon or stainless steel and can be coated with various coating materials depending on application requirements or customer demands. Optional special coating materials are also available for increased wear resistance.